Rugged keyboard for extreme environments with key illumination PrehKeyTec, specialist in data entry systems and keyboards, presents a new keyboard with backlit keys at the EuroCIS and CeBIT shows. Precise work is possible with the USB keyboard SIK 2500 even in places with low ambient light. The robust keyboard manufactured to industry standards is resistant to dirt and water spray and ideal for environments with extreme requirements such as butcher shops, bakeries, or machinery. Weak light conditions often bring constraints on working with keyboards. Therefore, we have developed the new keyboard SIK 2500. She can be always and everywhere simply operated, because she can be used by the illuminated keys even in environments, which are little illuminated”, Rolf H. explains Ilse man CEO of PrehKeyTec GmbH. additional light sources when working with the keyboard are therefore superfluous.
This creates better working conditions in areas that require work in the dark.” At the Black keyboard you can see on the brightly lit keys even in the dark, which button was pressed. Red LEDs shine through each key and brighten up letters, characters and numbers. In addition, two status LEDs num lock and CAP buttons serve permanently as a light source. The light according to both the brightness and duration and intensity of illumination of the buttons are individually adjustable. Rough situation conditions with dust, dirt, oil or spray water specialist for extreme conditions often lead to errors and failures on conventional keyboards. The new PrehKeyTec keyboard is therefore equipped with a particularly robust design with spraying water and Crumb protection for areas with extreme environmental requirements such as bakeries, butchers or machinery. The keyboard SIK 2500 is certified in accordance with protection class IP65 and therefore completely resistant to dust and resistant to spray and spray water. In demanding retail environments, as well as in the industry the keyboard can be not only used durable because they is immune to dirt, but due to the EPOXY coating also resistant to abrasion.
That the keyboard is ergonomically designed, its also in continuous operation easier. The volume of the Keycklicks when the keystroke is individually adjustable, so that the user finds the tactile feedback that is desired by him when entering. The setting key codes is possible via the USB interface without further ADO. The keyboard layout is available in German or international layout and has about an 18 mm key grid.
The Ci70 i.ROC ex offers innovative technology intrinsically safe handheld computers ecom instruments GmbH and Intermec, Inc. a new intrinsically safe portable computer for use in potentially explosive atmospheres announce. Areas of application are oil refineries and platforms, petrochemical and pharmaceutical production facilities, as well as companies with hazardous environments. The new i.ROC Ci70 ex is the first product of a strategic partnership between ecom instruments and Intermec, which was previously announced in December 2011. The distribution of the designed from the ground up ex-secure PDAs is done exclusively by ecom. The Ci70 i.ROC ex is the latest development of the successful i.ROC series of ecom and developed at the same time the first together with Intermec PDA. The last but not least makes him into a new showpiece for mobile computers through a variety of features that are unique to mobile computers in environments with explosion hazard.
In addition, it offers the largest number of worldwide approvals for use in potentially explosive atmospheres – ATEX about IECEx to NEC. Also, is it fully compatible to all applications, which have been developed for the Intermec 70 series and integrates easily into existing systems. Mobile computer used in potentially explosive atmospheres a compromise often mean, because they could not so far rely on latest technology”, explains Rolf Nied, CEO of ecom instruments. Ecom and Intermec have pooled their development expertise, to provide the current state of the art in this intrinsically safe handheld computer solution.” Unique modular concept of the i.ROC Ci70 ex offers a number of features, the unique selling propositions for intrinsically safe portable computers are: complete wireless network connection – WWAN (3 G UMTS or CDMA), WLAN (IEEE 802.11 a / b / g / n) and Bluetooth 2.1 provide fast data transfer even under difficult reception conditions. Modern local – and wide-range scanning technology for the first time in intrinsically safe version available.
Aim of GS is consistency within the text and enhancing the quality of the documentation. Get all the facts for a more clear viewpoint with Atmos Energy. “So far the texts were recorded in MS Word” explained Dipl.-ing. Klaus Stemple, Managing Director of F & E/production. “this was a high expense for linguistic consistency and translation work was very time consuming.” A consistent description is however essential for the GS products especially since the same components with analog controls are used in different products. Their descriptions are translated in the future only still once and can be reused thanks to the translation memory for different devices. In addition to time and cost savings, this approach allows also the quality of translation, which is necessary for a life-saving medical device. Receive upcoming translations Contact person at the respective area representatives about the across Web client. This can be tracked at any time, what has already been localized.
“Already the first projects showed that we regain the translations much faster and with better quality”, Dr. Christian Klimmer, Managing Director Marketing & sales/finance at GS is looking forward. “Still we have a better overview at any time, how much percent of the translation work is already done. Even those in the countries are enthusiastic about the solution with across, because the effective translation for them means a huge time savings and improve the quality.” About the GS Elektromedizinische Gerate G. GmbH Stemple GS Elektromedizinische Gerate G. Stemple GmbH is a successful, internationally operating family company in Germany, which produces 30 years developed highly innovative devices to the occurrence of many people affected by the sudden cardiac arrest. About across, across systems GmbH with German headquarters in Karlsbad, (Germany) and a U.S.
branch in Glendale (in Los Angeles) is manufacturer of the across language server, a market-leading software platform for all language resources and translation processes within the company. Through the use of across the and thus the process costs can be reduced with higher translation quality and more transparency within the shortest time. The language server can be used on conforming 15038:2006 for translation services EN with the DIN. Across systems GmbH is a certified partner of Microsoft, which ensures the successful and certified implementation of Microsoft technologies. Integrating across IT environments is possible thanks to a software development kit (SDK). Across professional services and well-known system integrators and technology partners provide support for this. Across cooperates closely with international universities and colleges in the context of product development and is professionally accompanied by an own Scientific Advisory Board with leading representatives of the relevant areas of expertise. Customers across are (excerpt): 1 & 1 Internet AG, Allianz Versicherungs AG, HORNBACH-Baumarkt-AG, HypoVereinsbank, Miele, SMA solar technology AG, ThyssenKrupp, u.
In case of failure of the hard drive electronics write-read unit goes back in your tense Parkposistion, but the magnet disc rotates out and write-read unit is lowered down slowly on the magnetic disk. It recommends that water damage to water or weather damage immediately to give the disk a laboratory specialising in data recovery. Since the magnetic disks inside the plate after a water damage are contaminated. To perform even a data recovery of such damaged media, the magnetic disc in the clean room laboratory using special chemicals in a complex procedure must be cleaned before ever to think of irdendwelche measures for data recovery. Strong ambient temperatures can be significantly heat also of a failure of the hard drive. Here the user can prevent, by controlling the temperature of your hard drive regularly and if necessary measures take to improve the cooling performance of PC system. As a general rule for all types of physical damage: you go to a specialist.
Any further attempt on the stored data on the hard drive can get have a complete loss of data, so that even a professional data recovery lab can no longer help. This particularly applies to all hard drive from 750 GB to 2 TB, because the data density is so high, that E.g. damage have serious consequences as compared to a 40-80 GB hard drive model! What is therefore required for problems with the disk? What can you do to the hard drive data recovery? First of all, it is useful to categorize the corresponding problem. It has one with a logical defect (for example, deleted files) or physical damage to the disk to do it. Data recovery hard disk as a general rule, is the hard drive in the BIOS is not recognized, then you will be not recognized under Windows or on foreign computers. Also Linux boot CDs or other software are useless in such scenarios. In case of damages that suggest bad sectors, it is advisable first to create a sector-based copy of the hard drive. To do this, you can use the TrueImage program. After passing the appropriate measures to restore the data to the image by, and no longer to the actual original disk.
This year, more than 100,000 from over 140 countries and regions also wrote the HKTDC Hong Kong Electronics fair (AE) their success as the world’s largest industry event continues. Together with the parallel electronicAsia was one of the Hong Kong Trade Development Council (HKTDC) over 100,000 visitors from over 140 countries and regions, an increase of six percent compared to the previous year. New materials, products and trends, among other well-known international brands such as Fujitsu, Panasonic, Toshiba, LG and Intel presented them over 4,000 exhibitors in the Hong Kong Convention and Exhibition Centre (HKCEC). Hong Kong manufacturers were represented by companies such as Broadway, fortress and city Super. The HKTDC Hong Kong Electronics fair (AE) exhibitors from Denmark, Portugal and Sweden for the first time were among the 3,436 (2012: 3.322) exhibitors from 30 countries and regions. Special country pavilions showed news from China, Korea and Taiwan. The electronicsAsia recorded a total 598 (2012:578) exhibitors from 12 countries and regions with national pavilions from China, Japan, Korea and Thailand. Benjamin Chau, HKTDC Deputy Executive Director, expressed confidence regarding the future Hong Kong electronics exports.
Currently, the electronics industry has accounted for 59 percent of the entire Hong Kong exports. In the first eight months of the year, the industry recorded an export by six percent ($172 billion). Main markets were China, followed by the United States, Japan, Taiwan and Korea. Special attention, so Chau, lie in the future on the Asian markets. In addition, a recovery of the market in the United States and European countries, like France and Spain, is increasing.
Exhibitors on-site surveys reflected this assessment. Generally, a positive mood among manufacturers and buyers could be observed, as Benjamin Chau. Potential future new products such as 3D offer printer. You would increasingly demand leading to long term falling prices and new audiences, including small and medium-sized Companies that do. More than 1,000 exhibitors and visitors were interviewed in the survey by the HKTDC in order given, independent exhibition. Over 90 percent indicated that 2014 to be reckoned with even better or similar sales figures. Particularly interest is the rising markets, especially Latin America, Russia and the countries of the ASEAN region. This time electronic accessories, audio visual products as well as Smartphones and tablets were particularly popular among the buyers with related accessories. The HKTDC Hong Kong Electronics fair (AE) once again offered a wide variety of topics and product zones, special exhibitions and events. Among the highlights that were newly introduced i-world (170 exhibitors) and smart home (35 exhibitors) product areas. The HKTDC did thus take account of two industry trends: the growing popularity of smartphones and tablets, and appropriate accessories, as well as the trend to the intelligent infrastructure within buildings. The Hall of Fame saw 485 exhibitors this year, including internationally known brands such as Goodway, Motorola, Philips, Princess, Skyworth and VTech. In the increasingly popular small-order zone were more than 4500 products for sale. Total generated these 19,000 purchase requests. In the invention zone exhibitors presented prototypes and new products, including the City University of Hong Kong, The Hong Kong Polytechnic University, the Hong Kong invention Association Ltd. and the Hong Kong Scvience and Technology Parks Corporation. The next edition of HKTDC Hong Kong Electronics fair will be held in the spring, from 13-16 April 2014. In parallel, the HKTDC international ICT Expo 2014 opens its doors. Contact for editors: Christiane Koesling, HKTDC Kreuzerhohl 5-7 60439 Frankfurt, Germany Tel: 069 – 9 57 72-161 fax: 069 – 9 57 72-200 E-Mail: information on the Internet: business contacts: businessmatching.hktdc.com
© 2012-2025 The National Science Fair All Rights Reserved -- Copyright notice by Blog Copyright