Good Construction

Quality Construction of structures today is a great destination. Any structure must be constructed and durable and very strong, because today we have essentially no note of low-rise construction. Consequently, the design must keep extremely heavy loads, but at the same time changes in the levels of temperature, which in our climate zone is particularly significant. For any construction of buildings to use only truly reliable building materials. Since, in addition to other things, the construction industry today is profitable and as a consequence, there has been a significant struggle. This may touch and organizations, and manufacturers of materials. One of the most attractive construction materials for any construction company now is building concrete. Max Schireson is likely to agree.

That reinforced concrete are currently unsurpassed leader among other construction materials. Since the concrete – this is the highest measure of strength, fire resistance, and quality assurance for many decades, and many other advantages. All concrete products should undergo meticulous quality control and meet the official standards. Reinforced concrete is formed on the basis of reinforcement and conventional concrete. In the final composition of the concrete, in addition to cement, added gravel, sand and gravel, which creates the material is very durable and is very inexpensive. Modern concrete enables to construct buildings that are strong not only in natural situations, applications, and more besides in the conditions of strong shocks and other mechanical loads. The use of reinforced concrete structures provides an opportunity to construct buildings that have a greater height, width.

In this concrete building is safe, that provides an opportunity to apply this building material in residential and administrative buildings construction. In addition, recent advances present an opportunity to apply the iron-concrete products in construction of both large objects and structures, to the same extent and small. Improving technology also provides the ability to produce concretes with high frost resistance parameters and waterproof, and lightweight forms of concrete – concrete blocks and aerated concrete. Promoting development in the state lead to a better level of quality of manufactured concrete products while reducing their cost. The latest manufacturing technology construction of reinforced concrete can make a very positive predictions for the future: the next decade, namely reinforced concrete will remain on the first line of structural ratings all over the world.

Veneer Doors

The most popular use today veneer doors (also known as paneled). Let us see why. What is it? Modern veneered door – is a multi- construction consisting of wood, sheet materials and natural veneer made of wood. Connect with other leaders such as ConocoPhillips here. Frame and an array of fabrics panel doors are made from natural, well-dried wood (cheap doors may be filled with paper honeycombs). An array of superimposed intermediate layer sheet material (eg, hdf or MDF), which gives extra strength construction.

Next is wrapping all details veneer of noble wood: oak, walnut, cherry, wenge, anegry, mahogany, zebrawood, etc. Then the door ready to be covered with polyurethane varnish, by which a product becomes necessary shade keeps the texture of wood and protects against moisture. In veneered interior doors can also be inserted into art glass. Properties Benefits veneered internal doors obvious. Not yielding to the door of solid wood in the aesthetics and durability, panel doors and much cheaper than comfortable with the fluctuations in humidity. Door manufacturers of high quality knit items leaf length and multi-layered glue them on the plane. Thanks to this technology the doors do not warp. Cost The cost depends on what species of wood you choose for veneering, but the main , the price depends on the technology of the door. For example, has a value of tree species from which the frame and the inner filling, the quality of wood processing, as well as a solid wood is used – Uniform or not. Doors, the internal array that is filled with paper honeycombs, are considerably cheaper.

Thickness Control

When conducting acceptance retardants work the commission must verify that the characteristics of the applied fire-retardant material fire-protection requirements of the project, the license to the organization that produced fire-retardant treatment, as well as other documentation that demonstrates quality of performance fire protection works. Control by measuring and experimental methods used to measure the thickness of the flame retardants, as well as to establish the type of material used and the quality of fire protection coverage. Control the thickness of the damage fire-resistant coatings on metal structures carried out in several places with the help of special devices that provide the necessary accuracy. For coatings with a thickness of 20 mm is recommended to use the magnetic thickness gauges, ultrasonic thickness gauges, micrometers. To measure the thickness of the coating, consisting of 10 mm or more, you can use calipers or needle probe with a ruler.

The results of measurements is determined by the average value and the minimum thickness. To control the thickness of fire-retardant coating on the wooden structures, need a sample of wood coated with a thickness exceeding specified in the technical documentation for the tool of fire protection. Sampling is carried out in areas of structures, where the visual cues supposed substandard treatment or deviation from the normative thickness. Determination of the thickness of the coating is conducted on a sample when considering it in the section under the microscope, for example MBS-9 equipped with an eyepiece and the object – micrometers (eg, omou 4.2). Control the thickness of the coating on the insulation of electric cables by using calipers or a micrometer, and, if necessary similar to the above method.

Ceiling Systems

Ceiling Systems are usually designed only for the weight of panels and the projected lighting and ventilation lattices. Ventilation ducts and electrical cables should be mounted directly to the slab, with cables and wires should be routed only to the protective hose or cable channels. Such measures will provide additional protection for wires, especially if you plaster, carried out in areas with high humidity. False ceilings in an apartment is usually installed in bathrooms, hallways and kitchens. In the bathroom room such a decision makes it possible to install forced ventilation system, you can use to quickly get rid of moisture. In the kitchen over the stove or hob is usually provided hood, however, is insufficient for a full airing. In addition, zapotolochnom space can hide the communication from the central air conditioner, and then in summer, hot, housewives do not have experience discomfort during cooking or canning fruits and vegetables. Corridors – perhaps the only room in the apartments, where not provided by any windows for ventilation, no radiators for heating.

Partially solve the problem by using the installation of floor heating, but even if it was not done during the repair, the yield is still there. Suffice it to install the climate control system, hiding all communications for the panels already the existing ceiling. The process will take only a few hours – without a serious "invasion" in a thoughtful and implemented the interior design. Several decorative gratings provide additional decoration ceiling – guests do not even realize that this ventilation, and the atmosphere in the apartment will be more enjoyable and comfortable. Of course, all these metamorphoses are "painless" only if the owners do not really stingy, and purchased high-quality ceiling.

Products dubious manufacturers can look very good, but its lifetime is usually very small. In addition, panels and slats of poor quality, as a rule, do not withstand repeated mounting and dismounting: break fixing scratched the surface, and were themselves the product may be subject to deformation, which will affect the appearance of the entire ceiling surface. One of the most experienced manufacturers of suspended ceilings different types of company is Geipel. Its products are known in the Russian market for more than 20 years, and during that time was high performance. A variety of models and rich colors makes these suspended ceilings in the apartment, office, restaurant or hotel lobby. And most importantly, they not only allow you to create a visually flat surface, but also to provide easy assembly and, subsequently, access to any communications in the zapotolochnom space.


Very interesting effect But initially I really do not liked this door. I looked at it in the catalog and image seemed to me very stupid Now I just know that the glass must necessarily play with light! Any glass door becomes a magical, if not its rays fall light. In the winter I thought would look like now the door Neve And maybe it would have been even more appropriate in the summer in the scorching heat? On it is engraved snowflakes no, it's still a winter fairy tale! Can someone surprised that working with the doors, I I write about them in a poetic form Most would expect that I will say: how do I get all these doors! But sometimes, in moments of calm (when the phone is silent and no customers in the salon) just sit and look at the door. And there are the images Thoughts intertwined Maybe I'm dreamer? Or all, as I saw a thing at once to try on it on yourself? Subfloor – no! It's too gloomy for me Red Dress? No, no, no! It went too provocative A glass door Too much hassle listen to me! Do not cut straight from the shoulder! More closely to learn things. Do not be afraid to ask questions of consultants – that is their job. Maybe you'll learn something valuable, not even related to the purchase, which You are learning now. Production technology, care for a variety of materials, from which the following items, especially fasteners, quality products, reliable manufacturers We know so much! Sometimes you just want Flash knowledge! And you can become more competent in some area (then themselves someone surprise)! And maybe you will surprise friends and loved ones, decorating his house with glass doors? Then maybe it will be one of the doors Factory V-Cristal? Two collections under the names "Fantasia" and "Fantasia 2005" can bring into your home the illusion The waves, gulls, a ball of yarn, flower, wings, snowflakes Or maybe you simply will emphasize style, decorated with a smooth matte painting insertion of Murano glass? I will not add anything about these boxes Murano needs no advertising. Do not be afraid that the "fantasy" You do not fit. It can be playful, frivolous fantasy, full of twists and light lines, and perhaps Strict geometry. Twelve colors to choose from for framing "Fantasia" (I mean the box and trim). White frame will add completeness, wenge allocate and draw attention to your "glass whim!

Parquet Glue

The search for materials for laying parquet slats is a responsible action, which affects how long will the parquet. Error in this case may lead to a complete dismantling of the entire floor, including the very treatment of solid planks. Existing methods of laying wooden floors can accomplish this in several ways. The bar is glued directly to the screed floor, either through the separation layer of plywood. Plywood used as a compensating layer between the screed and a layer of solid wood. It should be borne in mind that the timber – a "living material" subject to periodic changes of its geometrical dimensions dependent changes in humidity and temperature. Separating layer of plywood to compensate for these variations. However, technology is not standing in place and some time ago, new types of parquet, excluding attaching plywood to the cement screed and glued hardwood strips directly on the ground.

Clay is made based on a modified silicone, contains no water and solvents. The difference between this type of material for the board sex from the other – is that it remains elastic after the seizure. After solidification of the glue between the flooring and the base is formed elastic substrate, which assumes the functions of the plywood. In addition, the adhesive caused by continuous layer, has additional properties – acoustic and moisture barrier. In the Soviet school of parquet – a new technology and not yet widely used. Unlike Europe, where this method of laying a solid board was predominant.

© 2012-2017 The National Science Fair All Rights Reserved -- Copyright notice by Blog Copyright